International Journal of Industrial Electronics and Electrical Engineering(IJIEEE).
Paper Title - Improvement Of Accuracy Of A Touch Switch With The Function Of Bending And Addition
Recently, touch switch is used in many cases. However, it had some disadvantages. For the improvement, we
proposed an advanced touch switch. The size of touch area can be changed easily. It can be bent. The number of switches
can be changed easily. Even if the number of switches changes, the number of electric wires does not change at all and the
size of detection circuit also does not change. Thus, it was very convenient, but there exist a problem. According as the
number of touch switches increases, the accuracy decreases. When a user touches the panel, the small current flows. This is
because it flows through human finger. The range of value is under [nA]. As practically, the maximum number of switches is
about 20. For one of the solution, an improved model is proposed in this study. This model has each sub-circuit under each
touch switch. If the switch is touched, the relay switch in sub-circuit is connected to voltage source directly. Different from
the value of current of conventional model, the current is much larger, so we can easily distinguish which switch is touched.
From our experiment and analysis, it is understand that more than 350 switches can be connected. It is enough number in
Index terms- Touch switch, Bent, Addition, High accuracy, No-fixed position.
Citation - Mingyu Fan ,
Daisuke Tanaka ,
Seiichi Serikawa ,
Mingyu Fan, Daisuke Tanaka, Seiichi Serikawa " Improvement Of Accuracy Of A Touch Switch With The Function Of Bending And Addition " ,
International Journal of Industrial Electronics and Electrical Engineering , Volume-4,Issue-2 ( Feb, 2016 )